CoreMorrow Bipolar 2-Channel High Voltage Piezo Controller

 E80.A2K is an open-loop, 2-channel output piezo amplifier. The output voltage is up to -300V~+300V, and bandwidth is up to 1kHz. E80.A2K adopts bipolar voltage output mode, which can drive and control bipolar piezo bender or piezo tube scanner. The peak current of 500mA can make piezo actuator achieve faster step response time.



Features

• Open loop, 2-channel output
• Output voltage : -300V~+300V
• Bandwidth up to 1kHz
• Peak current up to 500mA

Applications

Application scenarios such as driving bipolar piezo ceramics and requiring bipolar high voltage control.

 Panel Introduction

E80.A2K is compact and small, with a height of only 50mm. The function definitions of various parts of the panel are as follows.



Parameters

Model: E80.A2K
Channel: 2
Analog input voltage: -5~+5V
Output voltage: -300~+300V
Peak current: 500mA/channel
Average current: 15mA/channel
Average power: 9W/channel
Bandwidth: 1000Hz/channel
Operating temperature: -25~65℃
Power supply: 28V/5A
Power supply interface: SF812-S2
Analog input connector: BNC-50KY
PZT output connector: ERA.0S.116.CTL
Size: 200×200×50mm


Original link: http://www.coremorrow.com/en/newsshow-66-826-1.html


Location: Harbin, China

Comments

Post a Comment

Popular posts from this blog

Application of Piezo Fiber Phase Modulator in Adaptive Optics Synthetic Aperture

Image
  In recent years, the optical synthetic aperture imaging technology has developed rapidly. It is a high-resolution imaging technology that uses multiple small aperture systems to synthesize a large aperture system through optical means. Optical synthetic aperture imaging technology makes the entire imaging system smaller and lighter. Therefore, it is also an important direction for the development of ground-based and space-based large-scale telescope systems. In the adaptive optics synthetic aperture imaging remote sensor system, factors such as the environment or the vibration of the carrier platform will cause the phase error of each sub-aperture in the synthetic aperture array, which will cause the image quality to deteriorate. Therefore, the improvement of imaging quality requires real-time measurement and correction of phase errors. CoreMorrow's piezoelectric ceramic fiber phase modulator can meet these requirements. Principle and Composition of Optical Synthetic Aperture Ima...
Read more

High Voltage Power Amplifier for Ultrasonic Gas Detection Applications

Image
  High-voltage power amplifiers (also known as power amplifiers, voltage amplifiers, etc., manufacturer: CoreMorrow) are amplifiers internally equipped with voltage and power amplifier circuits, which can amplify and output weak external analog signals (such as analog signals from signal generators). The gain of the high-voltage power amplifier can be as high as 180 times, and its output voltage value V, output frequency value f, etc. can be adjusted. Before introducing how high-voltage power amplifiers are used in ultrasonic gas detection, let's first understand the ultrasonic gas detection technology and its composition principles. Compared with the traditional ultrasonic gas detection method, the emerging technology adds a pair of ultrasonic sensors. This pair of sensors is placed in the unmixed background gas, and the distance between the sensors is exactly the same as that of the other pair of ultrasonic sensors. In this way, the synchronously emitted ultrasonic waves reach th...
Read more